manualshive.com logo in svg

Krone AM 203 CV, Руководство по эксплуатации

Поделиться
Скачать
Krone AM 203 CV Скачать руководство пользователя страница 29

27

4.4 Oil Level Check and Oil Change for

the mower and conditioner drive

Oil Level Check

The gearboxes for the mower and conditioner drive
units have a common oil supply.
To check the oil level for the gearbox, twist out the
screw (1). The oil must come up to the oil check hole.
Top up with oil if necessary.

Oil Change

The oil should be changed after about 350 hectares of
operation. Unscrew the oil drain screw (2) and the oil
check screw (1) on the main gearbox. Collect the
drained oil (approx. 1 litre) in a suitable container. After
the oil has drained, insert the oil drain screw. Fill with
new oil up to the oil check hole. Close the oil check hole
with the screw. For oil quantities and oil types, please
refer to the chapter “Technical Data”.

After an oil change, the used oil must be
disposed of in the correct way!

KRONE

600

900

0

AM-0-032

0139-441

A

B

1

KRONE

600

900

0

AM-0-033

0139-441

A

B

1

2

4.5 Oil level check and oil change in the

gearbox for the 1000 rpm power take-off

Oil level check

To check the oil level, move the disc mower to working
position. Unscrew oil level check plug (1). The oil must
reach the hole of the check plug. Fill in fresh oil if
necessary.

Oil change

To change the oil, unscrew oil drain plug (2) and oil
level check plug (1). Collect the oil (approx. 0,2 litres )
in an appropriate container. Drive home the oil drain
plug again and fill fresh oil up to the hole of the oil level
check plug. For the oil quantity and quality see the
chapter "Technical Data".

NOTE:

Change the oil after the first cut, then
every 350 hectares.

AM-3-095

2

1

Содержание AM 203 CV

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды