manualshive.com logo in svg

Krone AM 203 CV, Руководство по эксплуатации

Поделиться
Скачать
Krone AM 203 CV Скачать руководство пользователя страница 19

17

When coupling the disc mower to the tractor,
it is essential that the compensation spring
(2) be pushed back onto the retaining bolt
(1) and secured with a hinge clip (3) and
washer.

Mounting the compensating spring is
only possible in transport position.

AM-0-013

3

1

2

•

Only carry out work on the mower unit once the PTO shaft has been switched off, the
engine switched off and the ignition key removed. Secure the tractor against
unintentional operation and rolling away.

•

Always check protective devices for damage before operation. Replace damaged
protective devices immediately. Risk of injury!

•

Prop up the cutterbar when raised. Never stand under a suspended load!

•

Safe operation is only guaranteed if the cutter blades are fitted according to the
instructions.

•

Always check the mower unit for damaged, missing or worn cutter blades before
operation. If necessary, replace cutter blades. The same applies for retaining
components.

•

To prevent unbalanced rotation, only replace missing or damaged cutter blades as
complete sets.

•

Never fit cutter blades with different levels of wear to one drum/disc.

•

Whenever you change cutter blades also check retaining components and replace
them if necessary.

•

Move guards into position.

2.9 Safety measures before  mower operation

Heavily damaged linings (see illustration)
must be replaced immediately to prevent
any risk of damage to the cutterbar.

MH-0-001

Содержание AM 203 CV

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды