KROHNE OPTISYS SLM 2100, Руководство пользователя, Страница: 49 / 88

OPERATION
5
49
OPTISYS SLM 2100
www.krohne.com 01/2017 - 4002737304 - MA OPTISYS SLM 2100 R04 en
On the parameter level you see a list with one or more parameters or data. You can scroll
through this list using
↑
or
↓
:
On the parameter or data level you have the possibility to change the decimal point, numbers,
units or settings. Before that you have to choose the desired parameter or data and open to edit
it as follows:
• Press > to open and edit the first list item or choose another item using
↑
or
↓
and press >.
i You are in the parameter edit mode now. All changeable values are highlighted and shown
reverse (if nothing is shown reverse, you are in the read-only view and you cannot change
the setting).
• Use
↑
or
↓
to change the highlighted area; if there are numerical values or a decimal point to
be changed, you can move the cursor with > to the desired position and change its value
using
↑
or
↓
.
• If you want to return to the parameter or data list and save your input, press
^
; afterwards you
can press
^
one or more times to return to the main menu.
• If you want to return to the next higher level without saving the input, press > and
↑
at the
same time.
INFORMATION!
Like the lowest menu level (i.e. the parameter or data level) some submenus also offer the
possibility to make adjustments. The procedure is similar to the procedure on the parameter
level.
INFORMATION!
In this list all parameters or data which have been changed (i.e. they deviate from the default
setting) have a check mark at the right end of their line (see position number
4
in the following
drawing).
Display with list of parameters or data
Figure 5-5: Example of a list with parameters and data
1
Indicates a possible status message in the status list (only if there are one or more messages)
2
Superior submenu or subsequent submenu
3
Menu code of selected parameter (see table of menu structure or function tables)
4
Denotes the change of a parameter (this marking allows to simply and quickly identify all data which differ from the
default setting when browsing through the list); instead of the check mark there can also appear a lock symbol at this
position, it indicates a parameter that cannot be changed because of the parameter lock on the front.
5
Indicates position within the current item list
6
Next menu item, reachable by pressing
↓
(if "- - -" in this line indicates, this signalises the end of the list)
7
Currently setting of the chosen menu item
8
Selected menu item, in bold characters
9
Previous menu item, reachable by pressing
↑
(if "- - -" in this line indicates, this signalises the beginning of the list)