Kress Robotik Mission NANO, Руководство пользователя

Страница: 14 / 26

14
EN
• Remove or prevent access to obstacles that MissionNANO™ could accidentally climb on and damage its
blade turning disc.
• Remove all debris and foreign objects from your lawn.
6. App
Your MissionNANO™ is able to connect with smartphone. Using MissionNANO™ App for your smartphone,
you can change your MissionNANO™'s general settings, and view the machine's status and error messages.
To connect smartphone to your MissionNANO™:
Step 1: To download the MissionNANO™ App, use your smartphone to scan the QR code below or download it
from Playstore (Google-Android), AppleStore (Apple-iOS) or our website www.kress-robotik.com .
Step 2:
Enter the MissionNANO™ APP, and then follow the instructions to connect to your Wi-Fi.
*The Serial No. can be found at the rear of MissionNANO™ as shown in Fig. H.
NOTE:
1. If your Wi-Fi information changes, MissionNANO™ needs to be re-set according to Step 1 to 2.
2. When MissionNANO™ is located in an area with low or no Wi-Fi signal, instructions sent from the mobile
App may not be executed immediately. MissionNANO™ will receive instructions when it returns to an area with
good Wi-Fi signal.
3. For strong Wi-Fi signal to ensure stable connection, it is recommended to install Wi-Fi extenders to cover
areas with weak or no Wi-Fi signal.
7. Boundary Wire Basics
7.1 Pegging the Boundary Wire
Use the boundary wire distance gauge to set the correct distance between the wire and the border of your
lawn (more than 26cm*).
* This is the recommended distance. The provided
distance gauge ensures proper installation.
If your neighbor also uses a MissionNANO™, keep a
spacing of at least 1 metre between your boundary wire
and your neighbor’s.
The boundary wire must outline the intended mowing area
exactly. Your MissionNANO™ will become confused by
extra bends or coils of boundary wire that are not part of
its mowing area (See Fig. I). If there is excess boundary
wire after the mowing area has been outlined, cut it off
Only suitable for
iOS 11.0 or higher
H