Kress Robotik Mission NANO, Руководство пользователя

Страница: 21 / 26

21
EN
Blue light
flashing three
times per
cycle
MissionNANO™
is upside down.
Turn MissionNANO™ upright.
NOTES
• Before turning power on, always return MissionNANO™ to its territory. If not, the error indication light will
flash red. This message is also displayed when MissionNANO™ is sitting over the boundary wire when
turned on.
• If for any reason—i.e. a party, children playing...—you want to park your MissionNANO™ in the charging
base: press then . MissionNANO™ will go to its charging base and stay there. MissionNANO™
will wait until the next scheduled mowing session. If you want to re-start it, press then to
start mowing.
• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary
wire. Please refer to the previous installation instructions and check your set up with its help.
• If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not
provided with the charging base: when MissionNANO™ runs out of charge, take it manually to the charging
base, turn power on by turning the main switch to “I”(on), press
then , the charge process will
start.
• If MissionNANO™ runs abnormally once in a while, please try to restart it. If the problem is not resolved, try
to removing and reinstalling the battery. If the problem is still not resolved, please contact a Kress service
agent for help.
• Do not wash the machine with a high pressure washer. This could cause damage to the battery or the
machine.
12. Security
If MissionNANO
TM
is connected to your smartphone, you can lock it on your smartphone. This prevents
unauthorised people from being able to use it.
13. Troubleshooting
If your MissionNANO
TM
does not work correctly, follow the troubleshooting guide below. If the issue
persists, contact your Dealer.
Symptom Cause Action
The LED light on the charging
base does not turn on.
There is no power.
Check the charging base is connected
properly to the charger and the charger
is connected to a suitable power
supply.
Green light flashing on the
charging base.
The boundary wire isn’t
connected.
Check that the boundary wire has been
connected correctly to the charging
base.
Check there are no breaks in the
boundary wire, especially in the wire
ends.