Kress Robotik Mission NANO, Руководство пользователя

Страница: 18 / 26

18
EN
C. Clean the contact pins and the charging strips
Clean the contact pins located on the charging base and the charging strips located on the MissionNANO™
using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips
periodically to ensure the MissionNANO™ successfully charges each time.
9.3 Battery Life
The heart of the MissionNANO™ is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully
charged and kept in a cool dry place between (-20°C~60°C).
NOTE: The recommend MissionNANO™ operation temperature is between 0-55
o
C.
The life-span of the MissionNANO™’s battery depends on various factors, such as:
• The length of the mowing season in your region
• Amount of hours the MissionNANO™ mows per day
• Battery maintenance during storage
MissionNANO™ can be charged manually without the boundary wire.
1. Connect the charging base to a suitable power supply. The green light on the charging base will
turn on.
2. Manually dock the MissionNANO™ into the charging base while the MissionNANO™ is powered
off. (See Fig. P)
3. The green light on the charging base will turn to red, and the battery indication light will flash
green and red. MissionNANO™ will begin to charge.
9.4 Winter Hibernation
Your MissionNANO™ will live longer and healthier if it is allowed to hibernate. So even though it is tough, we
recommend storing your MissionNANO™ in your shed or garage during the winter.
Before you prepare your MissionNANO™ for winter hibernation, we recommend you:
• Thoroughly clean your MissionNANO™
• Fully charge the battery
• Turn the power off
To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of MissionNANO™ from water. NEVER store MissionNANO™ upside
down outdoors.
The boundary wire can be left in the ground although its ends should be protected, such as placed in a tin can
with grease. If the charging base is left outside for the winter, leave the boundary wire connected.
NOTE: When bringing MissionNANO™ back to work after winter hibernation, make sure the charging strips
and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the
App, make sure the date and time are correct and send MissionNANO™ back to what it loves doing: mowing.
9.5 Replacing the Battery
WARNING: Power off before attempting any adjustment, replacement or repair.
Before replacing the blades, turn your MissionNANO™ OFF and put on protective gloves.
If you need to replace the battery, follow these steps:
1. Gently turn your MissionNANO
TM
upside down.
2. Remove the screws on the battery cover. Remove the battery cover. (See Fig. Q1)
3. Lift out the old battery carefully. Press the latch and release the connectors. (See Fig. Q2)
P