Kress Robotik Mission NANO, Руководство пользователя

Страница: 11 / 26

11
EN
5.2 How does my MissionNANO
TM
know where to go?
Your MissionNANO™ is capable of doing things on its own. MissionNANO™ knows when it needs to go to
its charging base to charge, can sense when it is raining, can stop itself if it senses a problem, and knows to
stop, draw back, and turn around when it bumps into something blocking its path. MissionNANO™ will also
automatically stop its blade turning disc from rotating if it is lifted off the ground to prevent an accident.
A. Finding the Charging Base
When your MissionNANO™ needs to recharge, it will stop mowing and follow the boundary wire in an anti-
clockwise direction back to its charging base. MissionNANO™ is pre-programmed to mow the grass near the
boundary wire once a week. By default, MissionNANO™ will mow near the boundary wire at a random time
during the next week after it is powered on.
If you don’t want to enable boundary cut, deactivate it via your smartphone.
B. Rain sensors
MissionNANO™ is equipped with a rain sensor which
detects rain and tells the MissionNANO™ to stop mowing
and follow the boundary wire back to its charging base
(See Fig. B).
MissionNANO™ will resume mowing after passing the
delay time, the default delay time is 180mins. Delay time
setting can be changed via MissionNANO™ APP.
When the rain sensors are wet, MissionNANO™ returns
to its charging base. The error indication light will flash
blue four times per cycle. When the rain sensors dry,
MissionNANO™ will begin the delay time countdown or return to mowing (depending on the saved settings).
If you want to exit from the rain delay, dry the sensor area, and perform a power cycle by operating the main
switch. After the power cycle has been performed you can see that the blue LED is not flashing and so you
can operate again.
NOTE:
If the delay time is set to 0, MissionNANO™ will continue mowing.
C. Sensing the boundary wire
MissionNANO™ always obeys the border set by the
boundary wire and uses sensors at its front to detect it.
(See Fig. C)
D. Starting and stopping while mowing (See Fig. D, E1, E2)
If you would like MissionNANO™ to stop mowing, simply press the STOP button on top of the mower. To start
mowing, turn the main switch to “I” (on). Wait until the battery indication light stays green. (If MissionNANO™
has low battery capacity, the battery indication light will stay red.) Press
, then press .
If MissionNANO™ senses something is wrong, the error indication light will indicate the fault message. For
information on these messages, refer to the Error Messages. MissionNANO™ will turn off if it does not receive
any input from the user within 20 mins.
To resume:
• Turn the main switch to “O”(off)
• Correct the problem (refer to Error Messages)
• Turn the main switch to “I”(on). Wait until the battery indication light stays green. (If MissionNANO™ has low
battery capacity, the battery indication light will stay red.)
• Press , then press
• Now the MissionNANO™ will begin to mow!