Rev. Date: 12/14/10
Page 12
MODEL #5200-P
A
B
A
B
4) Cut the following holes: (Using illustration 4 as reference ONLY)
a. Blower Inlet: 5”
b. Hydraulic Lines: 2”
I
Illustration 4
5) Place the machine in the truck lining it up with the holes.
6) Locate and drill 9/16” holes for the four hold down holes located in the bottom of the base flange.
Again, check the underside of the truck body for any obstructions. Use 1/2” bolts and nuts to bolt
the base to the truck floor.
7) Run hydraulic lines to the machine.
8) Attach hydraulic lines to the hydraulic motor. Note: The shaft on the hydraulic motor should be
running counter clockwise. If the motor is running in the wrong direction, disconnect the hydrau-
lic lines and reverse the hook-up.
Hydraulic Lines
Содержание 5200-P
Страница 28: ...Rev Date 12 14 10 Page25 MODEL 5200 P PARTS LIST 5200 Exploded Parts View Unidirectional Center Down ...
Страница 29: ...Rev Date 12 14 10 Page26 MODEL 5200 P 5200 Exploded Parts View ...
Страница 30: ...Rev Date 12 14 10 Page27 MODEL 5200 P 5200 Exploded Parts View ...
Страница 36: ...Rev Date 12 14 10 Page33 MODEL 5200 P SERVICE RECORD DATE MAINTENANCE PERFORMED COMPONENTS REQUIRED ...