KREMLIN REXSON
19
Manual : 574.331.112
Check the 5 mm / 0.2"
dimension
between
the
screw (85) and the plate
(89).
Lubricate the slides (54).
Reinstall the slides and the
cart (rod with plate).
Tighten
the
screws
manually.
Place the cart downwards
and tighten the low part of
the slides with a clamps.
Tighten the screws with the
wrench.
Install on the top the plate (65) with the connectors.
Move the clamp to the top of the slides and tighten the upper screws.
Move the cart checking if the bearings run.
Lubricate the rod (34) and reinstall the ball screw (32).
Install it in the strap (84).
Line up the different parts.
Install the plate (30) on the lower part of the ball screw and fix it with the screws (31).
Reinstall the proportioning part, the outlet valve and the inlet valve.
CHANGING THE ELECTROVALVES (91)
Disconnect the electrovalves.
Change them.
EV (91G) that controls the inlet valve is towards the outside.
EV (91E) that controls the outlet valve is towards the inside.
91G
54
45
49
74
72+73
76
91E