Main Menu, Navigation and Setup Cont...
Main Audio input device options are:
Analog
CAST – C1, C2
Balanced – B1
Single-ended – S1, S2, S3, S4, S5
Tape – Tape Fixed Single-ended Input
VCR – Dedicated VCR Single-ended input
5.1 PRE – Dedicated direct 5.1 channel analog input
2. Digital
HDMI A – Auto Signal detection.
HDMI A is used when the source component utilizes the I
2
S protocol. I
2
S (Integrated
Interchip Sound) is the carrier for all of the new uncompressed formats ie TrueHD,
DTS-HD Master audio etc… HDMI A should be the default HDMI setting for use with
uncompressed PCM or Bitstream sources.
NOTE:
In order to receive uncompressed formats the video output of the source
device must be set to 720p or higher.
HDMI S – S/PDIF Signal mode.
Decodes from the standard HDMI audio transport known as S/PDIF typically used for
earlier sources that have audio over HDMI in an S/PDIF format. For this type of source
use the HDMI S option. These source units may not transfer audio on the advanced
HDMI audio transport.
NOTE:
HDMI audio inputs are defi ned by the Video selection.
S/PDIF Optical (TOSLINK) – OPT 1, OPT 2, OPT 3, OPT 4
S/PDIF Coaxial – COAX 1, COAX 2, COAX 3, COAX 4
Disabled - No audio input selected, no audio will pass.
Previous - Outputs the last active audio input selected.
Choose an Analog Decode Preference
The Analog decode preference is a processor mode that can be triggered when the analog
input signal is sent to the processor. The Preamp mode is a direct connection to the Volume
control and does not use and signal processing designed for best analog performance.
The analog decode modes are:
STANDARD DECODE MODES
Dolby PLIIx Movie
Dolby PLIIx Music
DTS NEO: 6 Cinema™
DTS NEO: 6 Music™
1.
a.
b.
c.
d.
e.
f.
a.
b.
c.
d.
e.
f.
C.
1.
2.
3.
4.
Содержание Evolution 707
Страница 1: ...EVOLUTION 707 OWNER S REFERENCE ...
