5
Manual
www.kraun.com
2.2. Quick installation and usage
There are only three things that you need to do to see the video from the IP CAM.
1. Connect the IP CAM to the home/office network.
2. Install the KraunView software on the notebook/PC.
3. Key in the ID/password of the IP CAM(from the ID/Password card) on the KraunView, and then you can
see the video.
First, Connect the IP CAM to the home/office network
Please connect the IP CAM accessaries to the IP CAM body correctly, including the bracket, power adapter
and Ethernet cable, as shown in Figure 2-2. And connect the other end of the Ethernet cable to the home
network or office network. Usually, this Ethernet cable is plugged into a home NAT/router device or an
Ethernet switch if in the office, as shown in Figure 2-2. Since the default settings of the IP CAM use DHCP
function and very often there is a DHCP server on most of the Home/office network, the IP CAM should be
connected to the Internet immediately.
Figure 2-2: IP CAM connection diagram.
