Kratki PANTHER MERLOT, Инструкция по установке и эксплуатации

Страница: 41 / 108

41
Safety
Carefully read the following information:
• Connecting a stove to a gas installation and its maintenance can be carried out only by a qualified
fit er or a service technician of heating gas appliances.
• If the control flame goes ou , wait for at least fi e minutes before trying again.
• It is strictly forbidden to make any modific tions in the design of the gas stove.
• Gas control system components must not be exposed to moisture.
• Do not operate the unit without inserting its glass.
• Do not touch hot parts of the stove, in particular, the glass.
• While children or other unaware persons are near a working unit they should not remain unatten-
ded.
• It is forbidden to place decorative elements used for the lining of the combustion chamber in front
of the control flam .
• Do not place flammable m terials near stove.
• It is prohibited to place combustible materials in the combustion chamber. If you feel gas leakage,
do not operate the unit. As soon as possible, shut off the ga , ventilate the room where the stove is
and contact your service representative.
• Any cracked glass should be immediately replaced.
• In the case of malfunctioning, cut off the gas supply and ontact your service representative.
Installation
Freestanding Stove is equipped with protective devices against uncontrolled outfl w of gas from
the main burner. Before connecting the appliance, please read all connection diagrams given in this
chapter. The gas stove is adapted to be connected to a special coaxial chimney system allowing si-
multaneous supply of fi e into the air and flue gas discha ge to the outside of the building. To ensure
proper operation, installation of the stove can only be done by qualified persons with app opriate
licences.
Prior to the release of gas to the stove, the fit er should:
• Perform a leak test for the gas connections.
• Check the correctness of joining the components of the system.
• Check for proper connection of the stove to the chimney system.
• Perform test kindling in the stove.
• Check the correct operation of all components and system security.