2.2.6.
HDMI & DVI Inputs
HDMI with or without HDCP, 36-bit video compatible.
DVI-D input with or without HDCP
Signal formats -video
484i and 576i (SD) in double-rate formats (1440 pixels per line), 480p, 576p (ED), 720p, 1080i at 50,
59.94 & 60Hz, 1080p at 24, 25, 30, 50, 59.94 & 60Hz.
Signal formats
– computer
DOS, VGA
– WUXGA up to 165 MHz pixel clock
2.2.7.
Audio Output
Audio is embedded in HDMI and SDI video streams and brought into the VP-794 through the respective
input channels. The audio is passed through the system and re-embedded into the HDMI and SDI
output signals.
Also, VP-794 features a S/PDIF coaxial digital audio output connector for monitoring audio of the HDMI
and SDI channel.
When HDMI is selected as the input channel the HDMI EDID is read by a video source such as a Blue
Ray Player. VP-794 allows the source to provide the formats shown under output formats for HDMI in
the below table. (Note: Note: Dolby TrueHD and DTS HD-Master are not in the list of audio formats and
thus not supported.)
All formats are re-embedded into the HDMI output data stream, those which are not allowed on the SDI
or SPDIF output are muted on the individual channels.
Output Channel
Output Format
HDMI
PCM up to 8ch, up to 24Bit, up to 192kHz sampling rate
(incl. 32kHz,44.1kHz,48kHz,96kHz,192kHz)
Dolby Digital (AC3) up to 5.1 channels, up to 640kBit/sec bit stream rate
MPEG2 up to 8ch, up to 112kBit/sec bit stream rate
DTS up to 6.1 channels, up to 1536kBit/sec bit stream rate
SDI
PCM up to 8ch, up to 24Bit, 48kHz sampling rate
SPDIF
PCM up to 2ch, up to 24Bit, up to 96kHz sampling rate
(incl. 32kHz,44.1kHz,48kHz,96kHz)
Dolby Digital (AC3) up to 5.1 channels
DTS up to 6.1 channels
