3.14.5.
Menu Settings
This menu provides items to change the menu position and menu display time, i.e. the time after which
the OSD is switched OFF again with no user interaction. OSD Messages can be activated and
deactivated.
The menu language can be altered and the keypad can be locked. To unlock the keypad a combination
of keys has to be pressed at the same time. The locking of the keyboard is accompanied by the
message that the keypad is locked and which keys need pressing to unlock the unit. When successfully
unlocking the keypad the message shows up: Keypad unlocked.
VP-794 has a menu to switch OFF the OSD menu. The LCD menu
– which is a copy of the OSD menu
– then serves to navigate the menu. Also, the backlight level of the LCD itself can be set in this menu.
3.14.6.
Network Settings
The Network Settings menu allows to configure the VP-794 TCP/IP address. Under Address Type a
static or DHCP leased address can be chosen. The static address and Netmask need to be entered
manually.
The Network Settings menu has a section with information on the DHCP Status and IP address
assigned to the board, as well as the fixed MAC Address programmed into the VP-794. The DHCP
status is OFF when static assignment is used or it displays an address when DHCP has leased an
address accordingly or it is None assigned if the lease was not successful.
Note: When changing from DHCP to Static mode or vice versa it is strongly recommended that VP-794
is powered down after such a change, then powered back up, so that it is properly recognised by other
devices on the network.
3.14.7.
Factory Defaults
This button let you restore all settings to the default values of the VP-794, thus, provide a means to get
back to a known (good) system state. A requestor will come up and ask to confirm prior to actual
restore.
3.14.8.
Operation Mode
Operating Mode allows to choose between the regular multiple unit mode with blend and warp and a
single unit mode featuring PiP functionality. VP-794 will reboot when this setting is changed.
