Overview
3
3
3 Overview
The Kramer
VP-438
is a high quality presentation switcher and scaler. It
accepts one of 10 inputs: four HDMI signals, two computer graphics signals on
15-pin HD connectors, two composite video signals on RCA connectors and
two component video
1
The
VP-438
Presentation Switcher / Scaler
:
signals on RCA connectors. It scales the video, embeds
the audio, and outputs the signal to the HDMI output, as well as to a computer
graphics output and an RGBHV video output with digital audio and analog
stereo audio outputs.
•
Is HDTV compatible and the resolution can be up- or down-scaled
2
•
Is HDCP compliant, the HDCP (High Definition Content Protection)
license agreement allows copy−protected data on the HDMI input to pass
only to the HDMI output
•
Output signal is available in three formats: 1 HDMI and 2 RGBHV (on 5
BNC connectors, and one 15−pin HD connector)
•
Has analog audio inputs which include volume control, and digital
(S/PDIF) and analog stereo audio outputs
•
Automatically detects and selects the audio source for the HDMI input.
Default selection is HDMI – if this is not present, then the machine uses
the audio from the analog input
•
Comes with an On-Screen Display (OSD) for easy setup and adjustment,
accessible via the IR remote control and via the front-panel buttons
•
Has a non-volatile memory that retains the last settings used
•
Supports firmware upgrade
3
Control your
VP-438
:
via RS-232
•
Directly, via the front panel push buttons
•
By RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
•
Remotely, from the infrared remote control transmitter
The
VP-438
is housed in a 19” 1U rack mountable enclosure, with rack “ears”
included, and is fed from a 100-240V AC universal switching power supply.
1 Also known as Y, Pb, Pr, Y, Cb, Cr and YUV; compatible with both SD and HD component
2 you can find the available resolutions in
Table 8
3 To check if firmware upgrades are available, go to our Web site at
http://www.kramerelectronics.com
