Connecting the VP-438 Presentation Switcher / Scaler
9
9
6 Connecting the VP-438 Presentation Switcher / Scaler
To connect
1
your
VP-438
, as illustrated in the example in
Figure 2
, do the
following
2
1. Connect an HDMI source (for example, a DVD player) to each of the
HDMI VIDEO INPUT connectors
:
3
2. Connect a computer graphics source to the PC 1 15-pin HD VIDEO
INPUT connector.
(from 1 to 4).
3. Connect a composite video source (for example, a composite video player)
to both CV VIDEO INPUT RCA connectors.
4. Connect a component video source (for example, a component video
player) to the COMP 1 P
R
, P
B
and Y, VIDEO INPUT RCA connectors.
5. Connect the audio input signals to the AUDIO INPUT terminal block
connectors, as required (not shown in
Figure 2
).
6. Connect the RGBHV VIDEO OUTPUT BNC connectors to an RGBHV
acceptor (for example, an RGBHV display).
7. Connect the HDMI VIDEO OUTPUT connector to an HDMI acceptor (for
example, a plasma display).
8. Connect the VGA VIDEO OUTPUT 15-pin HD connector to a VGA
acceptor (for example, a projector).
9. Connect the audio output signals to the AUDIO OUTPUTS stereo analog
audio acceptor and/or the digital audio acceptor, as required (not shown in
Figure 2
).
10. Connect the power cord
4
(not shown in
Figure 2
).
1 You do not have to connect all the inputs and outputs, connect only those that are required
2 Switch OFF the power on each device before connecting it to your VP-438. After connecting your VP-438, switch on its
power and then switch on the power on each device
3 Alternatively, you can connect the DVI connector on the DVD player to the HDMI connector on the VP-438 via a
DVI-HDMI adapter. When using this adapter, you can connect the audio signal via the terminal block connector
4 We recommend that you use only the power cord that is supplied with this machine
