Controlling the VP-438
11
11
7 Controlling the VP-438
The
VP-438
can be controlled via:
•
The front panel buttons (see
Section 7.1
•
The OSD menu (see
)
Section 7.2
•
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller (see
)
Section 7.3
•
The infrared remote control transmitter (see
)
Section 7.4
7.1 Controlling via the Front Panel Buttons
)
The
VP-438
includes the following front panel buttons:
•
Input selector buttons for selecting the required input: CV (1 and 2),
COMPONENT (1 and 2), PC (1 and 2) or HDMI (1 to 4)
•
BLANK, MUTE and FREEZE buttons
•
MENU, ENTER, and arrow
1
•
RESET TO XGA/720p and PANEL LOCK buttons
buttons
2
7.2 Using the OSD Menu
The control buttons let you control the
VP-438
via the OSD menu.
Press the:
•
MENU button to enter the menu
3
•
ENTER button to accept changes and to change the menu settings
•
Arrow
1
buttons to move through the OSD menu, which is displayed on
the video output
On the OSD menu, select EXIT to exit the menu.
1 Up, down, left and right
2 As defined in
Table 1
3 The default timeout is set to 10 seconds
