Kozy-World GLD2460R, Инструкция пользователя, Страница: 25 / 35

25
THERMOSTAT FUNCTION
SETTING DESIRED ROOM TEMPERATURE
This remote control system can control the thermostat when the transmitter is in the THERMO
mode (The word ROOM must be displayed on the screen).
To set the THERMO MODE and desired room temperature:
1. Press the MODE key until the LCD screen shows the word ROOM. Then the remote is in the
thermostatic mode.
2. Press and hold the SET key until the desired set temperature is reached. (By pressing and
holding the set key the LCD screen set numbers will increase from 45° to 99° and then restart
over at 45°).
3. Next release the SET key. The LCD screen will display the set temperature for 3 seconds and
the LCD screen will flash the set temperature for 3 seconds. Then the LCD screen will default
to display the room temperature.
TO CHANGE THE SET TEMPERATURE
1. Press and hold the SET key until the desired set temperature is reached. (By pressing and
holding the set key the LCD screen set numbers will increase from 45° to 99° then restart
over at 45°).
2. Next release the SET key. The LCD screen will display the set temperature for 3 seconds
then will flash the set temperature for 3 seconds then the LCD screen will default to display '
the room temperature.
3. Press the MODE key to disengage the thermo mode.
The word ROOM on the LCD screen will not show when the thermo is not in operation.
Note: The highest SET temperature is 99°F (3 °C) and the lowest temperature is 45°F (6°C).
Fig. 34
Fig. 35 Fig. 36
Fig. 37
Fig. 38
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (Fig. 34). (Flame icon will appear on
LCD screen in manual on mode).
OFF OPERATION
Press the OFF key and the appliance flame will
shut off.
During this time the LCD screen will show OF
(Fig. 35). After 3 seconds the LCD screen
will default to display room temperature and
the wood TEMP will show (Fig. 36).