Safety Barrier Installation
SECTION 4
FACING AND FINISHING
#CAR-39
R.11 February 2022
28
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
4.3 Safety Barrier Installation
4.3.1 Inside Fit - Recessed Installation
Model #C39-RSF2
1. Insert the upper hood flange into clips located at the top of the
upper air passage. Note: this will be a fairly tight fit.
2. Install the bottom frame piece. Align the hooks on the bottom
frame piece to the corresponding holes in the inside flange on
each side of the firebox floor. The bottom frame piece is shipped
with safety barrier #C39-RSF2 and must be installed.
3. Center the screen front over the glass frame assembly,
allowing the screen front’s mounting brackets to fit inside the
air openings.
4. Align the notched tabs (located on the back of the screen front)
with the slots in the fireplace. Raise slightly and push back
into position.
5. Lower screen front until the notched tabs are firmly in position.
•
To remove safety screen: lift the screen up and out of slots.
Upper hood
Safety screen
FIGURE 4.6
#C39-RSF2 Installation
