7
SYSTEM OPERATION
ROOM THERMOSTAT (Remote Control Operation)
The Smart Thermostat function adjusts flame height based on set temperature and actual
room temperature. As room temperature gets closer to set point the Smart Function will
automatically adjust flame down.
1. Press Thermostat key until word SMART appears on right side of temperature bulb
graphic.
2.
To adjust set temperature, press Up/Down arrow keys until desired set temperature is
displayed on LCD screen.
When SMART Thermostat is activated, manual flame height adjustment is disabled.
The remote control can operate as a room thermostat. The thermostat can be set to desired
temperature to control a rooms comfort level.
To activate this function, press the Thermostat Key. The LCD display will change to show
the room thermostat is ON and set temperature is now displayed. To adjust set
temperature, press Up or Down arrow keys until desired set temperature is display on
LCD screen.
SMART THERMOSTAT (Remote Control Operation)
Figure 7b
Figure 7a
KEY LOCK
This function locks the keys to avoid unsupervised operation.
To Activate: Press MODE and UP keys at same time.
To De-activate: Press MODE and UP keys at same time.
1.
Use MODE key to guide you to LIGHT icon.
2. The light intensity can be adjusted through six (6) levels. Use UP/DOWN Arrow
Keys to adjust intensity level. A single beep will confirm reception of the command.
ACCENT LIGHT KIT (not available in all fireplace models)
Figure 7d
Figure 7e
FAN SPEED CONTROL
Fan speed can be adjusted through six (6) speeds. To activate this function use Mode Key
to index to fan control icon. Use Up/Down Arrow Keys to turn on, off or adjust fan speed.
A single ‘beep’ will confirm reception of the command.
In Thermostat Mode:
Fan(s) have a five (5) minute delay time when fir eplace is lit,
allowing time for heat to build in fireplace before operating, and will continue operating
for approximately twelve (12) minutes after fireplace has been turned off.
In Manual Mode:
Fan (s) will oper ate at pr evious setting. Ther e is no delay in star t
up or stop time.
Figure 7c
