background image

Page 18

2.  Safety features

1.  Pressure switch:  This safety device is used to turn the feed off if pressure

is lost in the stove.

2.  Circulation fan override:  If your pellet heater begins to overheat, this

safety device switches the circulation fan to the highest possible setting
to try to cool your heater down to a safe temperature.

3.  High limit/manual reset thermal disk:  If the Circulation fan override fails

to cool the heater down fast enough, this thermal disk will turn the feed
off.  This safety device guards against your heater overheating.  If this
thermal disk trips, the right side panel will need to be opened and the
thermal disk reset.  See “Maintenance” and “Troubleshooting” sections
for more information.

3.  Electric Igniter

The 

KOZI

 Previa Cast Iron pellet stove is factory equipped with an electric igniter.  The

electric igniter is a convenient way of lighting the fire in your heater without the use of
lighter gels or starter fuels.  Ask your dealer if an electric igniter is right for you.

4.  

MX2

MX2

MX2

MX2

MX2

TM

 Control

4.1  Basic Description

The 

MX2

TM

 control is a digital control that uses a computer to control the operation of

your heater.  You should be familiar with all of the buttons on this control before using
your heater.  Each button and their function are described here.

4.2  “AUTO, HIGH/LOW, MANUAL Switch”

Your pellet heater is capable of operating in 3 modes ;”AUTO”, “HIGH/LOW” and
“MANUAL”.  Figure 17 will help you determine which mode is suitable for use in your
home.  More information on each of the modes is provided later.

Figure 17,  Mode selection.

Switch Position

Igniter 

Required

Thermostat 

Required

Description

AUTO*

Yes

Yes

Turns Heater ON and OFF based on wall thermostat, 
remote control, wall switch or other switching device.

HIGH/LOW

Optional

Yes

Switches heater from user setting to factory LOW setting 
based on wall thermostat, remote control, wall switch or 
other switching device.

MANUAL

Optional

No

Relies on a person to press the ON/OFF button located on 
the control pannel.  Will automatically light if equiped with 
electric igniter.

Mode Selection Guide

* CAUTION:  May result in shortened igniter life.  See complete mode description.

Содержание MX2









































Отзывы: