Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 99

Страница: 99 / 148

Reference

Control Panel

OASYS PCI

Mod Wheel+AT.

This is the sum of Mod Wheel and Aftertouch.

Mod Wheel+AT/2.

This is similar to Mod Wheel+AT, but the affect of Aftertouch is

cut in half.

Pitchbend.

This is MIDI Pitchbend, exactly as received, prior to scaling.

Pitchbend Scaled.

This is MIDI Pitchbend, as scaled by the Global or Program

Pitch Bend parameters.

Sustain.

MIDI Sustain Pedal (controller #64).

MIDI A-H.

These are the eight assignable MIDI controllers, as set in the MIDI

Preferences (described under “Factory Settings,” on page 122).

MIDI Tempo.

This receives MIDI Clock, for synching delays, LFOs, and other

tempo-based effects. In general, the Patch or Effect must be speci

cally designed

for MIDI Tempo in order to obtain meaningful results.

MIDI Start/Stop.

This receives MIDI Start/Stop, for controlling analog-style

sequencers or other components which can start and stop with an external MIDI
sequencer. In general, the Patch or Effect must be speci

cally designed for MIDI

Start/Stop in order to obtain meaningful results.

Keytrack Linear.

Linear keyboard tracking, centered on C4. See the graphs below.

Keytrack Exp.

Exponential keyboard tracking, centered on C4, for more variation

at the extremes of the keyboard. See the graphs below.

Keytrack Log.

Logarithmic keyboard tracking, centered on C4, for more variation

in the middle of the keyboard. See the graphs below.

Keytrack Left Lin.

Linear keyboard tracking below C4, with no modulation above

C4. See the graphs below.

Keytrack Left Exp.

Exponential keyboard tracking below C4, with no modulation

above C4. See the graphs below.

Keytrack Left Log.

Logarithmic keyboard tracking below C4, with no modulation

above C4. See the graphs below.

Keytrack Right Lin.

Linear keyboard tracking above C4, with no modulation

below C4. See the graphs below.

Keytrack Right Exp.

Exponential keyboard tracking above C4, with no modulation

below C4. See the graphs below.

Keytrack Right Log.

Logarithmic keyboard tracking above C4, with no modulation

below C4. See the graphs below.

Содержание Soundlink DRS OASYS PCI





















































































































































Результаты поиска

Содержание Soundlink DRS OASYS PCI

Отзывы:

Бренды по названию

Популярные бренды

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Результаты поиска

Содержание Soundlink DRS OASYS PCI

Отзывы:

Бренды по названию

Популярные бренды