manualshive.com logo in svg

Korg Soundlink DRS OASYS PCI, Руководство пользователя

Поделиться
Скачать
Korg Soundlink DRS OASYS PCI Скачать руководство пользователя страница 121

Reference

Preferences

OASYS PCI

117

Reset Master Output Bus When Opening Multis

On/Off.  

When this is enabled, a newly opened Multi’s Master Output Bus will be 

changed to the default, as set above, regardless of the setting saved in the Multi. 
Use this feature if you always want to audition sounds through a speci

fi

c Output 

Bus.

NOTE:

 If a Multi uses multiple Output Buses, changing the Master Output Bus 

may sometimes require the Programs and Effects to be re-arranged within the 
DSPs. This may either increase or decrease the effective amount of DSP processing 
power available. 
In extreme cases, if the Multi was already using up almost all of the available DSP 
processing power, it is possible that changing the Master bus may put things over 
the edge, making the Multi too big to be played. If this happens, disable the 
“Reset Master Output Bus” option, or take one of the other measures described 
under “Managing Resources” on page 60.

FX Auto-Load

On/Off.  

This sets the default for the Mixer Channel’s FX Auto-Load parameter.

Miscellaneous

Voice Scaling

0 to -30dB. 

This parameter sets the amount of gain scaling for Program voices, to 

provide headroom in the mixer. -12dB is the default, and in most cases should 
provide reasonably high output level without clipping. At the minimum voice 
scaling of 0dB, voices will not be scaled at all, and two or more voices sent to the 
same channel or output bus may cause clipping.
Increasing the headroom (by dragging the slider towards -30dB) will further reduce 
the possibility of clipping, but will also lower the output level for all Programs.
Decreasing the headroom (by dragging the slider towards 0dB) will raise the 
output level for all Programs, but will also increase the possibility of clipping.

Control Panel Knob Throw

This sets the mouse dragging distance, in pixels, required to move a knob all the 
way from its minimum to its maximum.

MIDI/Global tab

This page contains basic setup parameters for the OASYS PCI.

MIDI Settings

These settings control the MIDI functions of the OASYS PCI.

MIDI System (MacOS)

This parameter selects the system by which the OASYS PCI will send and receive 
MIDI. The parameter appears only on MacOS systems; on Windows, OASYS PCI 
always uses standard Windows MIDI. 

Содержание Soundlink DRS OASYS PCI





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды