Korg SGPROX, Руководство пользователя

Страница: 39 / 72

Performance Edit mode
39 39
When TIMBRE A/B is selected
2. PROGRAM (Program select)
Selects the program for the internal tone generator.
In this case, the
〈
BANK
〉
switch cannot be used.
Range A1 to D16
3. SW/CHANNEL (Tone genera-
tor setting)
Specifies whether the tone generator will sound
(ON) or not (OFF).
Range OFF, ON
4. LEVEL (Level setting)
Specifies the output level.
Range 0 to 127
When TIMBRE 1 to 8 is selected
2. PROGRAM (Program number
select)
Specifies the numbers of the Bank Select (MSB,
LSB) and Program Change messages that will be
transmitted when you select this Performance. Re-
fer to the external MIDI device’s manual for the
proper settings
Range BANK (MSB: upper) 00 to 127, ---
BANK (LSB: lower) 00 to 127, ---
PROGRAM
00 to 127, ---
When “PRG” is set to “---,” none of these mes-
sages (including Bank) will be transmitted.
Example 1. If you wish to transmit only a Program Change
message (and no Bank Select message), se-
lect “---” for both “BNK” MSB and LSB.
Example 2. If you do not wish to transmit a Program
Change, set “---” for “PRG.” (Bank Se-
lect messages will also not be transmit-
ted even if they are set to other than “---.”)
3. SW/CHANNEL (MIDI channel
setting)
Specifies the MIDI channel that the timbre will use.
With a setting of A-01 to A-16, messages will be
transmitted from the rear panel MIDI OUT A. With
a setting of B-01 to B-16, the rear panel MIDI OUT
B will be used. With a setting of “OFF,” no mes-
sages (including Note On/Off) will be transmitted.
Range A-01 to B-16, OFF
4. LEVEL (MIDI volume setting)
Specifies the volume message (control change #07)
that will be transmitted when the performance is se-
lected.
Range 0 to 127, ---
With a setting of “---,” this message will not be
transmitted.
1. TIMBRE SEL (Timbre select)
Use the
〈
VALUE
〉
switches or the
〈
VALUE
〉
slider to select the timbre that you wish to edit.
In addition, while you are in pages 1 to 8 you can select a timbre (1 to 8, A, or B) by holding down the
〈
PERF
EDIT
〉
key and pressing a select key 1 to 8, 9 or 10.
The parameters available for editing will be different depending on
whether you have selected a timbre A or B, or a timbre 1 to 8.
Range of selections TIMBRE A/B, 1 to 8