Korg SGPROX, Руководство пользователя

Страница: 17 / 72

17
Playing the SGproX
You can also use them to modify the sound of the SGproX.
If you connect separately sold pedals to the Assignable Pedal jack and Assignable Switch jack located on the
rear panel, you can use them as well for similar types of control.
The function can be specified independently for each controller.
The same control function will be assigned both to the switch and to the wheel (slider) of
〈
AW1
〉
,
〈
AW2
〉
,
〈
AL1
〉
,
〈
AL2
〉
,
〈
AL3
〉
and
〈
AL4
〉
respectively.
Depending on the controll type setting, you will be able to apply a specific control value by pressing the
switch while moving the wheel (slider), or to apply a specific control value fixed for each function each time
the switch is pressed.
For details refer to
Controllers / MIDI ( p.55).
The available controll functions, controll types, and fixed values that are specified for each function are
listed in the tables given in the
Controller / MIDI section ( p.58 and following).
Assignable wheels/switches 1/2
With the factory settings, a function of
[
Pitch Bend
]
is selected for
〈
AW1
〉
, and a
function of
[
LFO
]
is selected for
〈
AW2
〉
.
By operating a wheel or switch, you can modify the pitch of the SGproX’s sounds, or
apply vibrato or wah.
The corresponding MIDI message will also be transmitted from MIDI OUT.
For some programs, the effect may not be available.
Assignable sliders/switches 1 to 4
With the factory settings, a function of [ Brightness ] is assigned to
〈
AL1
〉
,
[ Decay Time ] is assigned to
〈
AL2
〉
, [ FX2 Depth ] (effect depth) is assigned to
〈
AL3
〉
, and [ FX Dyna Mod ] (effect modulation) is assigned to
〈
AL4
〉
. By operating
a wheel or switch, you can modify the sound of the SGproX.
The corresponding MIDI message will also be transmitted from MIDI OUT.
For some programs, the effect may not be available.
Assignable pedal
This is available only when a continuous pedal (XVP-10) is connected to the AP
jack on the rear panel. With the factory settings, a function of [ Volume ] is selected.
By operating the pedal you can control the volume of the SGproX.
The corresponding MIDI message will also be transmitted from MIDI OUT.
Assignable foot switch
This is available only when a pedal switch (PS-1) is connected to the AS jack on the
rear panel. With the factory settings, a function of
[
Sostenuto
]
is selected. By oper-
ating the pedal you can apply a sostenuto effect to the sound of the SGproX.
The corresponding MIDI message will also be transmitted from MIDI OUT.
❋
Sostenuto is when a damper effect is applied only to the sound of those keys which were being held at
the time that the pedal switch was pressed, so that only these notes will be sustained as long as the
pedal remains pressed.
The effect will not apply to notes which are played while the sostenuto pedal remains pressed.
ASSIGNABLE WHEEL
AW2 AW1
AL4/! AL3/0 AL2/a
ASSIGNABLE SLIDER
AL1/A
DELETE INSERT a A
ASSIGNABLE OUTPUT
L/MONO R SW PEDAL DAMPER
XVP-10 , EXP-2
ASSIGNABLE OUTPUT
L/MONO R SW PEDAL DAMPER
PS-1, PS-2 etc.