Korg Minilogue XD Скачать руководство пользователя страница 9

Страница: 9 / 62

Playing the minilogue xd

Selecting and playing a program

The minilogue xd features 500 program memories. When the unit is shipped from the factory,

preset programs are assigned to program numbers 1–200. Programs 201–500 contain init programs

(programs that have been initialized).

Check that the minilogue xd is in Play mode.

In Play mode, verify that the EDIT MODE button on the front panel is unlit. If the EDIT MODE

button is lit, press the EXIT button.

Turn the PROGRAM/VALUE knob to select a program.

The display will indicate the program name. For details, refer to “Program list” (p.55).

Tip:

In addition to showing the program name, the display can also be used as an

oscilloscope

to show the waveform created by the electrical signals of the sound.

Play the keyboard and try using the joystick and OCTAVE switch and other controls on the

front panel.

You can use the

OCTAVE switch

to transpose the playing area of the key-

board by ±2 octaves.
The

joystick

mainly controls the pitch when moved from left to right, and

changes parameters such as the cutoff frequency and vibrato depth when

moved up and down. You can also change which parameters are controlled

by the joystick. See “Button 4 (JOYSTICK)” (p.32) for details.
Use the

VOICE MODE TYPE switch

to switch between voice

modes. Select a voice mode and play. To learn more about voice

modes, see “VOICE MODE section” (p.15).

Make sure this button is unlit.

Содержание Minilogue XD































































Результаты поиска

Содержание Minilogue XD

Отзывы:

Бренды по названию

Популярные бренды

Korg Minilogue XD, Руководство пользователя

Результаты поиска

Содержание Minilogue XD

Отзывы:

Бренды по названию

Популярные бренды