manualshive.com logo in svg

Korg Minilogue XD, Руководство пользователя, Страница: 20 / 62

Поделиться
Скачать
Korg Minilogue XD Скачать руководство пользователя страница 20

20

SHAPE knob

Turning the SHAPE knob only will set the “MOD DEPTH,” and turning the SHAPE knob while 

holding down the SHIFT button will set the “RATIO OFFSET.”

These parameters are common for all oscillator types, and produce the following effects.

SHAPE knob effects

Type

Parameter

Effect

Common

MOD DEPTH

(SHAPE knob)

[0.00:15.00...] 

(range changes depending on TYPE)

This adjust the index and sets the intensity of the 

modulator.

RATIO OFFSET

(SHIFT SHAPE knob)

[1:4, 1:2, 1:1, 2:1...]

 (range changes depending on 

TYPE)

This adjusts the modulator ratio and adds over-

tones.

Tip: 

Besides the SHAPE knob, the oscillator settings can be changed in detail with six param-

eters in PROGRAM EDIT mode. See “When the VPM oscillator is selected” (p.36) for 

details.

USR

You can load your own oscillator programs into a user oscillator to make sounds on the minilogue 

xd.
Up to 16 user oscillators can be saved. One factory-set default user oscillator is included with the 

minilogue xd for demo purposes.
See the “logue SDK” (www.korg.com) for details.

TYPE knob

Selects a user oscillator.
The name of the user oscillator will be indicated on the MULTI ENGINE display.

SHAPE knob 

[0.0%... 100.0%]

Produces the effect that is set for the user oscillator.

MIXER section

Use this section to set the output levels of oscillator 1, 2 and the 

MULTI ENGINE, and to adjust the balance.

VCO 1 knob 

[0...1023]

VCO 2 knob 

[0...1023]

MULTI knob 

[0...1023]

These knobs control the output levels.

Содержание Minilogue XD































































Отзывы:

Нет отзывов