Korg Minilogue XD, Руководство пользователя

Страница: 24 / 62

24
EFFECTS section
The minilogue xd features high-definition digital effects.
You can select one variation from each effect including delay, re-
verb and modulation, and combine them.
Use the DEL/REV/MOD switch to select the effect type to set.
Next, use the OFF/ON/SELECT switch and the TIME and DEPTH
knobs to set how the effect will be applied.
The effect on/off state and the values of the TIME and DEPTH
knobs are saved along with each effect, so the sound that you set
will remain in memory, even if you use the DEL/REV/MOD switch
to switch the effect.
DEL/REV/MOD switch [DEL, REV, MOD]
Selects the effect type.
DEL: Selects the delay effect.
REV : Selects the reverb effect.
MOD: Selects the modulation effect.
OFF/ON/SELECT switch [OFF, ON, SELECT]
This sets the effect that you have selected using the DEL/REV/MOD switch.
OFF : Turns the effect off.
ON : Turns the effect on.
SELECT : When either “DEL” or “REV” is selected using the DEL/REV/MOD switch, flip the
switch to SELECT to switch between the sub-types for each effect.
When “MOD” is selected using the DEL/REV/MOD switch, flip the switch to SELECT to switch be-
tween the effect types (CHORUS

ENSEMBLE

PHASER

FLANGER

USER

CHORUS

...).
When switching between sub-types, flip the switch to SELECT while holding the SHIFT button
down.
Tip:
USER (user effects) are not installed as factory-set default effects, so they cannot be select-
ed, but you can load them into the minilogue xd to make them selectable. See the “logue
SDK” (www.korg.com) for details.
Note:
Both delay and reverb user effects cannot be used at the same time. The effect last se-
lected will be enabled.
For details on the effect types and sub-types, refer to “Effects list” (p.53).
TIME knob
This knob specifies the delay time, reverb time or modulation time. The setting range differs de-
pending on the effect type you select.
Turning the knob to the right will increase the speed or lengthen the time.
DEPTH knob [0.0%... 100%]
This sets the depth of the effect.
Turning the knob to the right will increase the intensity.
Tip:
When either “DEL” or “REV” is selected using the DEL/REV/MOD switch, turn the
DEPTH knob while holding down the SHIFT button to adjust the wet/dry balance of each
effect. The setting range is MIX WET: 0% – BALANCED – MIX DRY: 0%.