
185
Effects
Pitch/Phase Mod.
015: Analog Rec
(Stereo Analog Record)
This
effect
simulates
the
noise
caused
by
scratches
and
dust
on
analog
records.
It
also
reproduces
some
of
the
modulation
caused
by
a
warped
turntable.
b: Flutter
This parameter enables you to set the depth of the modula-
tion caused by a warped turntable.
e: Click Level
This parameter enables you to set the level of the click noise
that occurs once every rotation of the turntable. This simula-
tion reproduces record noise, and the noise generated after
the music on a vinyl record finishes.
Pitch/phase modulation effects
016: Chorus
(Stereo Chorus)
This
effect
adds
thickness
and
warmth
to
the
sound
by
modulating
the
delay
time
of
the
input
signal.
You
can
add
spread
to
the
sound
by
offsetting
the
phase
of
the
left
and
right
LFOs
from
each
other.
e: L Pre Delay [msec], f: R Pre Delay [msec]
Setting the left and right delay time individually allows you to
control the stereo image.
a
Speed [RPM]
Sets the r.p.m. of a record
33 1/3, 45, 78
b
Flutter
Sets the modulation depth
0...100
c
Noise Density
Sets the noise density
0...100
Noise Tone
Sets the noise tone
0...100
d
Noise Level
Sets the noise level
0...100
Src
Selects the modulation source for the noise level
Off...Tempo
Amt
Sets the modulation amount of the noise level
–100...+100
e
Click Level
Sets the click noise level
0...100
,
Src
Off...Tempo
Selects the modulation source for the click noise level
Amt
–100...+100
Sets the modulation amount of the click noise level
f
EQ Trim
Table , “Sets the EQ input level,” on page 176
0...100
g
Pre EQ Cutoff [Hz]
Sets the EQ center frequency
300...10.00kHz
Q
Sets the EQ band width
0.5...10.0
Gain [dB]
Sets the EQ gain
–18.0...+18.0dB
h
Wet/Dry
Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src
Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Analog Record
Simulation
Pre EQ
Pre EQ
EQ Trim
EQ Trim
PITCH/PHASE MOD.
a
LFO Waveform
Selects LFO Waveform
Triangle, Sine
b
LFO Phase [degree]
–180...+180
Sets the LFO phase difference between the left and right
Fx:010
c
LFO Frequency [Hz]
0.02...20.00Hz
Sets the LFO speed
Fx:009,
Src
Selects the modulation source of LFO speed
Off...Tempo
Amt
–20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync
Off, On
Switches between using the frequency of the LFO speed and using the
tempo and notes
Fx:009,
BPM
Selects MIDI Clock and assigns tempo
MIDI, 40...240
Fx:009
Base Note
Selects the type of notes that specify the LFO speed
Fx:009
Times
x1...x16
Sets the number of notes that specify the LFO speed
Fx:009
e
L Pre Delay [msec]
Sets the delay time for the left channel
0.0...50.0msec
f
R Pre Delay [msec]
Sets the delay time for the right channel
0.0...50.0msec
g
Depth
Sets the depth of LFO modulation
0...100
Src
Off...Tempo
Selects the modulation source of the LFO modulation depth
Amt
–100...+100
Sets the modulation amount of the LFO modulation depth
h
EQ Trim
Table , “Sets the EQ input level,” on page 176
0...100
i
Pre LEQ Gain [dB]
Table , “Sets the gain of Low EQ,” on page 176
–15.0...+15.0dB
Pre HEQ Gain [dB]
Table , “Sets the gain of High EQ,” on page 176
–15.0...+15.0dB
j
Wet/Dry
–Wet...–1:99, Dry, 1:99...Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Fx:010,
Src
Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Chorus
Chorus
Left
Right
LFO Phase
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ
HEQ
LEQ
HEQ
LFO: Tri / Sine
Содержание microARRANGER
