130
Card Edit environment
The WRITE/CARD IN USE LED
16. CARD EDIT ENVIRONMENT
The
Card
Edit
environment
is
the
place
where
you
can
manage
files.
This
edit
environment
overlaps
the
cur
‐
rent
operating
mode
(Style
Play,
Song
Play,
Backing
Sequence,
Song,
Program).
THE WRITE/CARD IN USE LED
When
the
drive
is
reading
or
writing
data
on
a
card,
the
WRITE/CARD
IN
USE
indicator
lights
up.
While
in
a
Card
page,
the
“Wait”
message
appears
in
the
display;
in
this
situation,
you
can’t
select
a
different
Card
page
(you
can,
however,
select
a
different
operative
mode).
Warning!
Never
remove
a
card
when
the
WRITE/CARD
IN
USE
LED
is
turned
on!
SUPPORTED CARDS
You
can
use
the
following
types
of
cards
to
save
or
load
data
to
and
from
the
microARRANGER’s
internal
memory:
•
SD
(High
Speed,
Ultra
II,
SDHC)
•
MMC
•
MicroSD
with
an
SD
adapter
•
MiniSD
with
an
SD
adapter
Note:
Before
you
can
use
the
SD/MMC
card,
you
must
format
it
on
the
microARRANGER.
Don’t
use
your
computer
or
digi
‐
tal
camera
to
format
(initialize)
a
card
you
plan
to
use
with
the
microARRANGER.
If
the
card
was
formatted
on
a
different
device,
it
may
not
work
correctly
with
the
microARRANGER
Note:
The
SD/MMC
card
is
not
included.
It
must
be
purchased
separately.
Note:
The
microARRANGER
supports
SD
cards
with
a
power
supply
voltage
of
2.7–3.6V.
SD and MMC card handling
•
Do
not
remove
the
card
from
the
drive
while
the
microARRANGER
is
reading
or
saving
data.
•
The
SD/MMC
card
may
be
hot
immediately
follow
‐
ing
use.
Power
‐
off
the
microARRANGER
and
wait
for
the
card
to
cool
before
removing
it.
•
SD/MMC
cards
are
precision
parts.
Do
not
bend
them,
drop
them,
or
subject
them
to
physical
shock.
•
Avoid
using
or
storing
SD/MMC
cards
in
locations
of
extremely
high
or
low
temperature
such
as
in
direct
sunlight,
a
closed
automobile,
or
near
a
heater,
or
in
locations
of
high
humidity
or
excessive
dust.
•
Avoid
using
or
storing
SD/MMC
cards
in
locations
where
they
may
be
subject
to
strong
static
electricity
or
electrical
noise.
•
Do
not
allow
dirt
or
foreign
matter
to
adhere
to
the
contacts
of
an
SD/MMC
card.
If
the
contacts
should
become
soiled,
gently
wipe
them
off
using
a
dry
cloth.
•
When
you
are
not
using
an
SD/MMC
card,
keep
it
in
the
protective
case
that
was
included
with
the
card
to
prevent
it
from
being
damaged
by
static
electricity.
•
Do
not
leave
an
SD/MMC
card
where
it
is
accessible
by
infants
or
children
who
might
place
it
in
their
mouth
and
swallow
it.
•
Carefully
read
and
observe
the
owner’s
manual
included
with
your
SD/MMC
card.
Write protecting an SD card
SD
cards
have
a
write
protect
switch
that
prevents
the
data
from
being
overwritten
accidentally
and
lost.
If
you
set
the
card’s
switch
to
the
protected
setting,
it
will
be
impossible
to
write
or
erase
data
on
the
card,
or
to
format
it.
If
you
need
to
save
edited
data
on
the
card,
move
the
switch
back
to
its
original
unprotected
set
‐
ting.
Inserting/exchanging cards
Inserting
a
card
Insert
the
card,
making
sure
that
it
is
oriented
correctly.
The
gold
contacts
should
be
facing
down,
and
the
angled
corner
to
your
right.
Removing
a
card
Press
the
card
inward
and
release
it,
and
the
card
will
pop
out.
Note:
Before
you
can
use
an
SD
card,
you
must
format
it
on
the
microARRANGER.
The
card
may
not
work
if
it
was
for
‐
matted
on
another
device.
Write-protect
switch
Protected
SD card slot
SD card
Содержание microARRANGER
