manualshive.com logo in svg

Korg M50-73, Руководство по параметрам

Поделиться
Скачать
Korg M50-73 Скачать руководство пользователя страница 88

Combination mode

80

COMBI P0: Play

This is the main page of Combination mode. Among other 
things, you can:

• Select combinations

• Select a program for each timbre, and specify its Play/

Mute and Solo On/Off status.

• Edit the Arpeggiator in simple ways

• Use the Tone Adjust function to make simple edits for 

program parameters

• Check the control surface content, and operate it.

Tip: 

Auto Song Setup

The Auto Song Setup feature copies the current Program or 
Combination into a Song, and then puts the M50 in record-
ready mode.

If inspiration for a phrase or song strikes you while you’re 
playing, you can use this function to start recording 
immediately. To do so:

1. Hold down the ENTER switch and press the 

SEQUENCER REC/WRITE switch. 

The Setup to Record dialog box will open and ask “Are you 
sure?”

2. Press OK.

You will automatically enter Sequencer mode, and will be in 
the record-ready state. 

3. Press the START/STOP switch to start the sequencer 

and begin recording.

For more information, please see “Tip: Auto Song Setup” on 
page 126.

0–1: Program T01–08,
0–2: Program T09–16

This is the main page for selecting and playing 
Combinations. You can also set the Program, Play/Mute, 
and Solo On/Off for each of the Timbres 1–8 and 9–16.

For more information, please see “0–1: Program T01–08, 0–2: 
Program T09–16” on page 80.

0–1(2)a: Combination Select

Bank

[A...D]

This indicates the currently selected combination bank.

Press one of the COMBI BANK A–D switches to select the 
desired bank.

• Each bank contains rewritable combination program 

areas for 128 combinations (a total of 1,792).

Note: 

Pressing one of the PROG BANK A–G switches while 

the 

Program Select

 parameter is selected will change the 

timbre program bank (rather than the combination bank).

Combination Select

[000...127]

Here you can select the desired Combination.

To switch combinations

• Choose “Combination Select,” use numeric keys 0–9 to 

input the desired combination number, and press the 
ENTER switch.

• Choose “Combination Select” and turn the VALUE dial 

or use the 

q

/

u

 switches.

Note: 

On this page only, the VALUE slider functions as a 

modulation source - which means that you cannot use it 
to select combinations.

• If the “0–1a: Combination Select” parameter is selected, 

the PROG BANK A–D switches will switch combination 
banks.

• From the Bank/Combination Select menu you can view 

and select combinations by bank.

• From the Category/Combination Select menu you can 

view and select combinations by category.

• You can use a foot switch to select combinations. For 

more information, please see the Global parameter “Foot 
Switch Assign” on page 228. For a list of the functions 
that can be assigned to the footswitch, please see “Foot 
Switch Assignments” on page 384.

• You can transmit MIDI program changes from a 

connected external MIDI device.

Bank/Combination Select menu:

1. Press the popup button located at the left of “Combina-

tion Select” to access the Bank/Combination Select 
menu.

2. Press one of the tabs at left or right to select a bank.

3. Select a combination from the list. You can directly 

press your choice within the list, or use the 

q

q

q

q

/

u

u

u

u

 

switches.

If the screen cannot display all of the available items, use the 
scroll bar.

0–1a

0–1b

0–1
Menu

Bank

No.

Description

A, B, C

000…127

Preloaded combinations

D

000…127

User combinations

Bank

Combination Select Popup

Combination Select

Category Popup

Tempo

Содержание M50-73




































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды