Korg M50-73, Руководство по параметрам

Страница: 10 / 419

Program mode
2
PROG P0: Play
This is the main Program mode page. Here, you can:
• Select patterns and programs for the Drum Track
• Adjust the oscillator and drum track levels.
• Make simple edits for the Arpeggiator
• Use the Tone Adjust function to make simple edits for
program parameters
• Check the control surface content, and operate it.
All MIDI data in Prog P0: Play is transmitted and
received on the global MIDI channel
MIDI Channel
(Global 1–1a).
Tip: Auto Song Setup
The Auto Song Setup feature copies the current Program or
Combination into a Song, and then puts the M50 in record-
ready mode.
If inspiration for a phrase or song strikes you while you’re
playing, you can use Auto Song Setup to start recording
immediately. For more information, please see “Tip: Auto
Song Setup” on page 126.
0–1: Main
0–1a: Program Select
Bank (Bank Select) [A...E, GM, g(1)...g(9), g(d)]
This is the Bank containing the current Program.
Press the PROG BANK A–GM switch to select a bank.
Pressing the PROG BANK GM switch steps through the
variation banks in the following order:
GM
→
g(1)
→
g(2)…g(8)
→
g(9)
→
g(d)
→
GM…
• Banks A–E each contain 128 rewritable programs (a total
of 640). Non-rewritable banks are organized as follows:
GM contains GM2 capital programs, g(1)–g(9) contain
GM2 variation programs, and g(d) contain GM2 drum
programs.
• The GM basic sounds will be selected for banks for
which there is no variation sound. (An “*” is displayed
at the beginning of the program name.)
For details on the factory Programs, please see the “Voice
Name List” (PDF).
Program Select [A…E: 0...127, GM, g(1)...g(9),
g(d): 1...128]
Here you can select a program.
To switch programs
• Choose Program Select , use the numeric keys 0–9 to
enter a program number, and press the ENTER switch.
• Choose Program Select , and turn the VALUE dial or use
the
q
/
u
switches.
Note: You cannot use the Value slider to select programs
while in the P0: Play page; instead, the VALUE slider
operates as a program modulation source.
• From the Bank/Program Select menu, view and select
programs by bank.
• From the Category/Program Select menu, view and
select programs by category.
• You can use a foot switch to select programs. (see “Foot
Switch Assign” on page 228 and “List of Foot Switch
assignments” on page 384)
• You can select programs by transmitting a MIDI
Program Change from a connected external MIDI
device.
Bank/Program Select menu:
1. Press the popup button at the left of Program Select to
open the Bank/Program Select menu.
2. Press one of the tabs on the left or right to select a spe-
cific bank.
The Variation button is active if Bank GM is selected;
pressing it will switch the banks in the following order:
GM
→
g(1)
→
g(2)
→
...
→
g(8)
→
g(9)
→
GM.
3. From the list, You can touch a Program’s name directly,
or use the Inc
q
and Dec
u
switches.
Use the scroll bar to view information not currently shown.
4. Press the OK button to confirm your choice, or press the
Cancel button to exit without switching Programs.
Bank/Program Select menu
Bank Main contents
A...D,
E000...095
preloaded programs
E096...127 user programs
GM GM2 capital programs
g(1)–(9) GM2 variation programs*
g(d) GM2 drums programs
0–1a
0–1b
0–1c
0–1
Menu
Bank
Program Select Popup Program Select
Category Popup Tempo
Tab
Scroll bar