Korg M50-73 Скачать руководство пользователя страница 131

Страница: 131 / 419

Combination: Menu Command Copy Insert Effect

123

Copy Insert Effect

This command copies effects settings from Program,
Combination, or Song. For more information, please see
“Copy Insert Effect” on page 76.

Note:

The slot’s MIDI control channel, as specified by the

parameter on the P8–1: IFX– IFX1–5 pages, will not be
copied.

Swap Insert Effect

This command swaps (exchanges) insert effect settings. For
more information, please see “Swap Insert Effect” on
page 76.

Note:

The slot’s MIDI control channel, as specified by the

parameter on the P8–1: IFX– IFX1–5 pages, will not be
swapped.

DrumKit IFX Patch

This patches the

Bus (IFX/Output) Select

settings for each

key of a drum kit, temporarily changing the insert effect
connection destinations.

You can execute this command if the program assigned to
the timbre is a drum program and

Bus (IFX/Output) Select

is set to

DKit

. The

Bus (IFX/Output) Select

setting (Global

5–4b) of each key in the drum kit must be set to one of IFX1–
5.

1. In the Routing1 page or Routing2 page, select the tim-

bre for which you want to make settings. (Select a tim-
bre parameter or Timbre Number.)

2. Select “DrumKit IFX Patch” to open the dialog box.

3. In the DrumKit “IFX” popup, select the output bus to

which you want to patch the signal: an insert effect or
L/R or Off.

Note:

To restore the condition of the drum kit, execute

IFX1

→

IFX1, IFX2

→

IFX2, IFX3

→

IFX3, IFX4

→

IFX4,

IFX5

→

IFX5 (see page 113).

Copy MFX/TFX

This command copies effect settings from Program,
Combination, or Song. For more information, please see
“Copy MFX/TFX” on page 76.

Note:

The slot’s MIDI control channel, as specified by the

parameter on the P9: MFX/TFX– MFX1 and TFX page, will
not be copied.

Swap MFX/TFX

This command swaps (exchanges) insert effect settings. For
more information, please see “Swap MFX/TFX” on page 77.

Note:

The slot’s MIDI control channel, as specified by the

parameter on the P9: MFX/TFX– MFX1 and TFX page, will
not be copied.

Write FX Preset

This command saves the edited effect into the M50’s internal
memory.

For more information, please see “Write FX Preset” on
page 77.

Содержание M50-73




































































































































































































































































































































































































































Результаты поиска

Содержание M50-73

Отзывы:

Бренды по названию

Популярные бренды

Korg M50-73, Руководство по параметрам

Результаты поиска

Содержание M50-73

Отзывы:

Бренды по названию

Популярные бренды