manualshive.com logo in svg

Korg Electribe R ER-1, Руководство пользователя

Korg Electribe R ER-1 - мощный и компактный ударный синтезатор, идеальный для создания удивительных ритмов и битов. Владельцам этого устройства лучше ознакомиться с его функционалом, прочитав официальное руководство пользователя. Вы можете скачать его бесплатно с manualshive.com. Начните творить прямо сейчас!

Поделиться
Скачать
background image

2

To ensure long, trouble-free operation, please read this manual carefully.
Precautions

Location

Using the unit in the following locations can result in a malfunction.

• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration

Power supply

 

Please connect the designated AC adaptor to an AC outlet of the correct voltage. Do not connect it to
an AC outlet of voltage other than that for which your unit is intended.

Interference with other electrical devices

This product contains a microcomputer. Radios and televisions placed nearby may experience recep-
tion interference. Operate this unit at a suitable distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as ben-
zene or thinner, or cleaning compounds or flammable polishes.

Keep this manual

After reading this manual, please keep it for later reference.

Keeping foreign matter out of your equipment

• Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it

could cause a breakdown, fire, or electrical shock.

• Be careful not to let metal objects get into the equipment. If something does slip into the equipment,

unplug the AC adaptor from the wall outlet. Then contact your nearest Korg dealer or the store
where the equipment was purchased.

THE FCC REGULATION WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modification to this system can void the user’s authority to operate this equipment.

CE mark for European Harmonized Standards

CE mark which is attached to our company’s products of AC mains operated apparatus until December 31, 1996 means it con-
forms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC). And, CE mark which is attached after January 1,
1997 means it conforms to EMC Directive (89/336/EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (73/23/
EEC).
Also, CE mark which is attached to our company’s products of Battery operated apparatus means it conforms to EMC Directive
(89/336/EEC) and CE mark Directive (93/68/EEC).

Содержание Electribe R ER-1





















































Отзывы:

Нет отзывов

Похожие инструкции для Electribe R ER-1

Alesis COMPACTKIT 7 User Manual preview
COMPACTKIT 7
Бренд: Alesis Страницы: 40
Arbiter Flats Instruction Manual preview
Flats
Бренд: Arbiter Страницы: 12
Delptronics LDB-1 Little Drummer Boy User Manual preview
LDB-1 Little Drummer Boy
Бренд: Delptronics Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды