background image

15

3. Basic operation (Quick Start)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

3. Basic operation (Quick Start)

1

3

2

3

1

2

2

Striking the part keys along with a song or

pattern

1. In Song mode or Pattern mode, press the Play/Pause key to

begin playback.

2. As you listen to the song or pattern, strike the part keys to

play along.

Modify (edit) the sound along with a song or

pattern

1. In Song mode or Pattern mode, press the Play/Pause key to

begin playback.

2. Press a part key (the key will light) to select the part that you

wish to edit.

3. Use the knobs and keys of the Synthesizer section to modify

the sound. The sound of the part that is playing will be modi-
fied as you move the knobs or keys.

You can press other part keys to edit other parts.

To save the pattern sounds that you modify here, use the Write operation (refer to p.17
"Saving a pattern that you create").
If you re-select a pattern or turn off the power without performing the Write operation,
the sound will return to its unedited state.

It is not possible to write the sounds you edit in a Song. Only in a Pattern can you
write the edited sounds.

Содержание Electribe R ER-1





















































Отзывы: