JetNet 4706/4706f Industrial Managed PoE Switch
69
4.9 SNMP
Simple Network Management Protocol (SNMP) is a
protocol used for exchanging management
information between network devices. SNMP is a
member of the TCP/IP protocol suite.
JetNet
4706/4706f
supports SNMP v1, v2c and v3.
A SNMP managed network consists of two main
components: agents and a manager. An agent is a
management software module that resides in a
managed switch. An agent translates the local
management information from the managed device
into a SNMP-compatible format. The manager is the
console through the network.
The following commands are included in this section:
4.9.1 SNMP Configuration
4.9.2 SNMP v3 Profile
4.9.2 SNMP Traps
4.9.3 CLI Commands for SNMP
4.9.1 SNMP
Configuration
This allows users to configure the SNMP V1/ V2c Community. The community string can
be viewed as a password because SNMP V1/ V2c doesn’t request you to enter a
password before accessing the SNMP agent.
The community includes 2 privileges: Read Only, and Read and Write.
With
Read Only
privileges, you will only have the ability to read the values in the MIB
tables. The default community string is set to Public.
With
Read and Write
privileges, you will have the ability to read and set the values in the
MIB tables. The default community string is set to Private.
JetNet 4706/4706f
allows users to assign 4 community strings. Type in each community
string and select its privilege. Then press the
Apply button
.
