JetNet 4706/4706f Industrial Managed PoE Switch
23
System Name
: Assign a name to the device. You can input up to 64 characters.
After you configure the name, the CLIP system will select the first 12 characters as the
name for the CLIP system.
System Location
: Specify the switch’s physical location. You can input up to 64
characters.
System Contact:
Specify contact people. Enter the name, e-mail address or other
information about the administrator.
You can input up to 64 characters.
System OID
: Set the SNMP object ID of the switch. You can follow the path to find its
private MIB in the MIB browser.
Note:
When you attempt to view a private MIB, you should
compile private MIB files into your MIB browser first.
System Description
: View a description of the system.
JetNet 4706/4706f
Industrial
Management Ethernet Switch is the name of this device.
Firmware Version
: Display the firmware version installed on this device.
MAC Address
: Display the unique hardware address (MAC address) assigned by the
manufacturer.
Once you have finished the configuration, click the
Apply
button to apply your settings.
Note:
Always remember to select
Save
to save your settings. Otherwise, the settings you
made will be lost when the switch is powered off.
4.2.2 Admin
Password
You can change the username and password to enhance security
The following figure is the Web UI for Admin Password
Username
: Key in a new username. The default setting is
admin
.
Password
: Key in a new password. The default setting is
admin
.
Confirm Password
: Re-enter the new password to confirm it.
Once you finish configuring the settings, click the
Apply
button to apply your configuration.
