40
of TFTP Server and Backup configuration file name. This mode can be used in
both CLI and Web UI.
TFTP Server IP Address
: You need to key in the IP address of your TFTP
Server here.
Backup/Restore File Name
: Please type the correct file name of the
configuration file.
.
Configuration File:
The configuration file of the switch is a pure text file. You
can open it by word/txt read file. You can also modify the file, add/remove the
configuration settings, and then restore back to the switch.
Startup Configuration File:
After you saved the running-config to flash, the
new settings will be kept and work after power cycle. You can use
show
startup-config
to view it in CLI. The Backup command can only backup such
configuration file to your PC or TFTP server.
Once you finish selecting and configuring the settings, click on
Backup
or
Restore
to run
Figure 4.2.6.1 Main UI of Backup & Restore
Technical Tip:
Default Configuration File: The switch provides the default configuration file in the
system. You can use Reset button, Reload command to reset the system.
Running Configuration File: The switch’s CLI allows you to view the latest settings
running by the system. The information shown here is the settings you set up but
haven’t saved to flash. The settings not yet saved to flash will not work after power
recycle. You can
use
show running-config
to view it in CLI.
