Open Frame Monitor- 15”, 17”, 19” - User Guide Rev. 1.0
// 19
Table 4: PC Display Modes 19“ Wide
Mode
Resolution
H Freq (KHz)
V Freq (Hz)
1
640 x 350
31.469
70.087
2
640 x 400
31.469
59.940
3
640 x 480
31.469
59.940
4
640 x 480
37.500
75.000
5
800 x 600
37.879
60.317
6
800 x 600
46.875
75.000
7
1024 x 768
48.363
60.004
8
1024 x 768
60.023
75.029
9
1360 x 768
47.712
60.015
10
1440 x 900
55.935
59.887
5.2.
Power Specification
The Open Frame Monitor is powered from an external Power Supply Unit (PSU). Kontron recommends the use of
Kontron’s specified PSU chosen to meet the product’s power specification and power protection requirements. The
Open Frame Monitor’s electrical specification can be found on the product’s type label.
The Open Frame Monitor’s nominal input voltage is 12 VDC or optionally 24 VDC. The Open Frame Monitor’s connector
panel is equipped with two different 12 VDC power connectors, one 2-pin DC power connector and one 12 VDC power
jack. Use only one of the 12 VDC power options to power the Open Frame Monitor.
For 24 VDC requirements, an optional 3-pin 24 VDC connector replaces the standard 2-pin 12 VDC connector.
Use only one of the 12 VDC power connectors (2-pin, 12 VDC or the DC-IN 12 VDC Jack).
Kontron recommends the use of Kontron’s PSU chosen to meet the product’s power
specification and power protection requirements.
Only connect the product to a PSU with a rated input voltage, power cable and the external
overcharge protection that corresponds with the electrical specification on the product’s
type label and complies with the Safety Extra Low Voltage (SELV) requirements.
The PSU is not delivered with the product. To order the PSU, see Table 1: Accessories.
Power protection features such as holdup time and brownout protect against peaks,
fluctuations and interruptions in the mains power, and help ensure operation without loss of
data or damage to the product.
