KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 55
Figure 43: Fan Assembly Front Side
Figure 44: Fan Assembly Rear Side
1
Fan assembly with two knurled screws
2
Connector for fan control
3
3x fans
4
2x tapped hole for knurled screw of filter
pad holder
5
Positioning plate of the fan assembly
6
Fan s assembly housing
7
Reverse side of (Figure 43, pos. 1) Knurled
screws
5.
Replace the fan assembly with a new functional module.
6.
Insert the fan assembly’s positioning plate (Figure 43, pos. 5) behind the fan compartment’s bottom plate and
push the fan assembly carefully into the fan compartment until the fan assembly’s connector (Figure 44, pos. 2)
is inserted completely into the internal fan power and control connector (Figure 42, pos. 3).
7.
Fasten the knurled screws of the fan assembly (Figure 41, pos. 1)
1
4
1
2
6
3
4
5
7
7
