KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 47
Installing the KISS 4U V3 SKX alone can result in product damage or personal injury.
Above and below the KISS 4U V3 SKX there are no restrictions, enabling installation directly
on top of another system.
Due to possible access restrictions, before installing in a 19” industrial rack:
•
Install all expansion card
•
Connect peripherals to the corresponding system por
ts.
To install in a 19” industrial rack, proceed as follows:
1.
Install the slide rails to the KISS 4U V3 SKX as described in Chapter 8.6: Installing Slide Rails (Option).
2.
Install the corresponding rail slide kits to the 19” industrial rack cabinet as shown in Figure 35.
3.
Push the KISS 4U V3 SKX with slide rail assembly into the corresponding slide rail within the 19” industrial rack
as far as possible and fasten at the rear of the 19” industrial rack cabinet.
4.
Firmly attach the KISS 4U V3 SKX’s to the sides of the 19” industrial rack using the handle bracket mounting
holes (Figure 9, pos. 3).
5.
Verify that the KISS 4U V3 SKX is securely mounted.
8.6.
Installing Slide Rails (Option)
Kontron offers compatible 19” Slide Rails and Rack Slide Rails Kit for the KISS 4U V3 SKX. For more information, see
Table 2: Accessories and Spares Parts.
Use two separate fixation methods
To support the KISS 4U V3 SKX’s weight, two separate fixation methods must be used:
•
Front handle brackets (right side and left side)
•
Slide rails L brackets / 19” rack rear side fixation
Verify KISS 4U V3 SKX is securely mounted
When using slide rails, the system must be securely mounted on the slide rails and front
handle brackets.
Use only the screws provided in the Slide Rail Kit to attach slide rails to KISS 4U V3 SKX.
To install slide rails, proceed as follows:
1.
Extend the slide rail to the pulled-out position to expose the inner part of the slide rail with screw holes
(Figure 32, pos. 2).
2.
Using the supplied screws firmly attach the side rail to the left side and right side.
3.
Push the slide rail into the pushed-in position (Figure 34).
4.
Install the corresponding rack slide rail kits to the 19” industrial rack cabinet, see Figure 35: Assembling Slide
Rails in an Industrial Rack Cabinet.
