KISS 4U V3 SKX – Preliminary Rev. 0.6
www.kontron.com
// 51
9.1.1.
Loss of AC Power
After an AC power loss, the KISS 4U V3 SKX restores as specified in the BIOS setup menu. To change the specified
restore state in the BIOS go to Advanced> Advanced Power Management (APM)> Restore on AC Power loss> and
choose between Power Off, Power On and Last State.
Observe the settings option for “Restore on AC Power Loss” in the BIOS Setup.
When set in Advanced> Advanced Power Management (APM)> Restore on AC Power loss>
•
[Power Off], the system goes into the OFF state after AC power loss
•
[Power On] the system reboots after AC power loss
•
[Last State] the system uses the last state before the AC power loss
9.2.
Operating System (OS) and Hardware Components Drivers
The KISS 4U V3 SKX is operational when switched on for the first time with a pre- installed OS and with all required
drivers. Drivers are available from Kontron’s Customer Section.
If ordered without a pre- installed OS, before starting the KISS 4U V3 SKX, install the operating system and the
appropriate drivers for the system configuration. Consider the manufacturer’s specifications for the OS and the
integrated hardware components.
Download the relevant drivers for the installed hardware from our web site at
www.kontron.com by selecting the product or visit Kontron’s Customer Section.
Pay attention to the manufacturer specifications of the operating system and the integrated
hardware components.
