DIMM-PC/MD Product Manual
Software Specification
Kontron
®
Embedded Modules GmbH
24
Revision 1.0
5.4.13 +FPOLL -
Indicate Polling Request
5-17
5.5 Service Class 2 Parameters
5-18
5.5.1 +FDCC - DCE Capabilities Parameters
5-18
5.5.2 +FDIS -
Current Sessions Capabilities Parameters
5-19
5.5.3 +FDCS - Current Session Results Parameters
5-19
5.5.4 +FLID= - Local ID String
5-20
5.5.5 +FCR - Capability to Receive
5-20
5.5.6 +FPTS= - Page Transfer Status
5-21
5.5.7 +FCQ - Copy Quality Checking
5-21
5.5.8 +FPHCTO - DTE Phase 0 Response Time-out
5-21
5.5.9 +FAXERR - T.30 Session Error Report
5-21
5.5.10 +FBOR - Data Bit Order
5-22
5.5.11 +FAA - Answer Parameter
5-22
5.5.12 +FBUF? - Buffer Size
5-23
5.6
ExampleSessions 5-23
6
Voice Commands
6-1
6.1
Voice Commands Overview
6-1
6.1.1 <DLE> Shielded Event Codes Sent to the DTE
6-2
6.1.2 <DLE> Shielded Codes Sent to the Modem (DCE)
6-3
6.2
Voice Commands
6.2.1 Configuration Commands
6-4
+FCLASS=8 - Select Voice Mode
6-4
+VNH -
Automatic Hang-up Control
6-4
6.2.2 Voice Commands
6-5
+VIP - Voice lnitialize All Parameters
6-5
+VRX - Start Modem Receive (Record)
6-5
+VTS - Send Voice Tone(s)
6-6
+VTX
-
Start Modem Transmit (Playback)
6-8
+VGR - Voice Gain Receive (Record Gain)
6-8
+VGT - Voice Gain Transmit (Playback Volume)
6-9
+VIT - Voice lnactivity Timer (DTE/Modem)
6-10
+VLS - Analog Source/Destination Selection
6-11
+VRA - Ringback Goes Away Timer
6-14
+VRN - Ringback Never Appeared Timer
6-15
+VSD - Silence Detection (Quiet and Silence)
6-16
+VSM - Compression Method Selection
6-17
+VTD - Beep Tone Duration Timer
6-18
+VDR - Distinctive Ring
6-19
+VDT - Control Tone Cadence Reporting
6-20
+VPR - Select DTE/Modem Interface Rate (Turn
0ff
Autobaud)
6-21
6.2.3 Speakerphone Commands
6-22
+VSP - Speakerphone ON/OFF
6-22
+VDX - Speakerphone Duplex Mode
6-23
+VGM - Microphone Gain
6-24
+VGS - Speaker Gain
6-25
