Kontron DIMM-PC/MD, Руководство по эксплуатации продукта

Страница: 17 / 27

DIMM-PC/MD Product Manual Hardware-Installation
Kontron ® Embedded Modules GmbH 15 Revision 1.0
6.2 Definition of the Hardware-Interrupts and of the I/O-Address
The definition of the Hardware-Interrupts and the I/O addresses is performed by means of
the DIP-switches located in the middle of the card ( see the picture below).
The relevant switch positions for the possible I/O Addresses and Hardware-Interrupts are
described in detail in the following table.
S1 S2 S3 S4 Address S1 S2 S3 S4 S2 S5 S6 S7 S8 Interrupt
OFF OFF OFF OFF 2E0
ON
OFF OFF OFF OFF OFF OFF OFF OFF IRQ 3
ON
OFF OFF OFF 2E8 OFF
ON
OFF OFF OFF OFF OFF OFF OFF IRQ 4
OFF
ON
OFF OFF 2F0 OFF OFF
ON
OFF OFF OFF OFF OFF OFF IRQ 7
ON ON
OFF OFF 2F8 OFF OFF OFF
ON
OFF OFF OFF OFF OFF IRQ 9
OFF OFF
ON
OFF 3E0 OFF OFF OFF OFF
ON
OFF OFF OFF OFF IRQ 10
ON
OFF
ON
OFF
3E8
(default)
OFF OFF OFF OFF OFF
ON
OFF OFF OFF IRQ 11
OFF
ON ON
OFF 3F0 OFF OFF OFF OFF OFF OFF
ON
OFF OFF IRQ 12
ON ON ON
OFF 3F8 OFF OFF OFF OFF OFF OFF OFF
ON
OFF IRQ 15
X X X
ON IRQ 5
(default)
OFF OFF OFF OFF OFF OFF OFF OFF OFF IRQ 5
NOTE:
The IRQ and I/O Address of the card should not be used by any other computer
peripheral equipment. If necessary, you should define your own address and IRQ.