Kontron DIMM-PC/MD, Руководство по эксплуатации продукта

Страница: 21 / 27

DIMM-PC/MD Product Manual Software Specification
Kontron ® Embedded Modules GmbH 19 Revision 1.0
V - Result Code Form 3-17
W - Connect Message Control 3-17
X - Extended Result Codes 3-18
&C - RLSD (DCD) Option 3-23
&D - DTR Option 3-23
&K - Flow Control 3-24
&M - Asynchronous!Synchronous Mode Selection 3-25
&Q - Sync/Async Mode 3-26
&R - RTS/CTS Option 3-27
&S - DSR Override 3-27
&X - Select Synchronous Clock Source 3-28
+IPR - Fixed DIE Rate 3-29
+IFC - DTE-Modem Local FIow Controi 3-30
+ILRR
-
DTE-Modem Local Rate Reporting 3-31
3.2.3 CaII Control 3-32
D - DiaI 3-32
T - Set Tone DiaI Default 3-35
P - Set Pulse DiaI Default 3-35
A - Answer 3-35
H - Disconnect (Hang-Up) 3-36
O - Return to On-Line Data Mode 3-37
L - Speaker Volume 3-38
M - Speaker Control 3-38
&G - Select Guard Ione 3-39
&P - Select Pulse DiaI Make/Break Ratio 3-39
&V - Display Current Configuration and Stored Profiles 3-40
&V1 - Display Last Connection Statistics 3-41
\V - Single Line Connect Message Enabie 3-42
%L - Report Line Signal Level 3-43
%Q - Report Line Signal Quality 3-43
*B - Display Blacklisted Numbers 3-43
*D - Display Delayed Numbers 3-44
-PPD= - Extension Pickup Notitication through 16550 UARI 3-44
-STE= - Set Telephony Extension 3-45
3.2.4 Modulation Control Commands 3-51
+MS - Modulation Selection 3-51
+MR - Modulation Reporting Control 3-53
%E - Enable/Disable Line Quality 3-55
%U - Select u-Law or A-Law Codec Type 3-56
B -
CCITT
or Bell 3-56
3.2.5 Error Control Commands 3-57
+ES - Error Controi and Synchronous Mode Selection 3-57
+EB - Break Handiing in Error Control Operation 3-59
+ESR - Selective Repeat 3-59