DIMM-PC/MD Product Manual
Software Specification
Kontron
®
Embedded Modules GmbH
21
Revision 1.0
S5 - Backspace Character
3-100
S6 - Wait Time before Blind Dialing or for Dial Tone
3-100
S7 – Wait Time for Carrier, Silence, or Dial Tone
3-100
S8 - Pause Time For Dial Delay
3-101
S9 - Carrier Detect Response Time
3-101
S10 - Lost CarrierTo Hang Up Delay
3-101
S11 - DTMF Tone Duration
3-101
S12 - Escape Prompt Delay (EPD)
3-102
S14 -
General Bit Mapped Options Status
3-102
S16 - Test Mode Bit Mapped Options Status
3-102
S19 - Reserved
3-103
S20 - Reserved
3-103
S21 - V.24/General Bit Mapped Options Status
3-103
S22 - Speaker/Results Bit Mapped Options Status
3-104
S23 - General Bit Mapped Options Status
3-104
S24 - Sleep lnactivitylimer
3-104
S25 - Delay To DIR 0ff
3-105
S26 - RTS to CTS Delay
3-105
S27 - Bit Mapped Options Status
3-105
S28 - Bit Mapped Options Status
3-106
S29 - Flash Dial Modifierlime
3-106
S30 - Disconnect lnactivity Timer
3-106
S31 - Bit Mapped Options Status
3-107
S36 - LAPM Failure Control
3-107
S38 - Delay Before Forced Hang Up
3-108
S39 - Flow Control Bit Mapped Options Status
3-108
S40 - General Bit Mapped Options Status
3-108
S41 -
General Bit Mapped Options Status
3-109
S46 - Data Compression Control
3-109
S48 - V.42 Negotiation Control
3-109
S86 - Call Failure Reason Code
3-110
S91 - PSTN Transmit Attenuation Level
3-111
S92 - Fax Iransmit Attenuation Level
3-111
S95 - Extended Result Codes Control
3-111
S210 - V.34 Symbol Rates
3-112
3.4
Cellular Commands
3-113
3.4.1 Cellular Phone Drivers
3-113
3.4.2 CelluLar Commands
3-113
^C2 - Download CelIular Phone Driver
3-113
^I - Identity Cellular Phone Driver
3-114
^T6
-
lndicate Status of Cellular Phone
3-114
3.4.3 Operation
3-115
Modem Configuration
3-115
Fax Configuration
3-116
Cellular Phone Configuration
3-116
3.5
Result Codes
3-118
