DIMM-PC/MD Product Manual
Software Specification
Kontron
®
Embedded Modules GmbH
18
Revision 1.0
Parameter Types
2-6
Parameter Set Command Syntax
2-7
Parameter Read Command Syntax
2-7
Parameter Test Command Syntax2-7
2.4.5 Additional Syntax Rules
2-7
Concatenating Commands after Extended Syntax Commands
2-7
Concatenating Commands after Basic Format Commands
2-8
2.5
Issuing Commands
2.6
Executing Commands
2.6.1 Aborting Commands
2-8
2.6.2 Handling of lnvalid Numbers and S-Parameter Values
2-9
2.7
Modem Responses
2.7.1 Responses
2-9
2.7.2 Extended Syntax Result Codes
2-10
2.7.3 Information Text Formats for Test Commands
2-11
Range of Values
2-11
Compound Range of Values
2-11
3 Data
Command Set
3-1
3.1
Command Guidelines
3-1
3.1.1 Escape Code Sequence
3-1
3.2
Data Commands
3-1
3.2.1 Generic Modem Control
3-2
Z - Soft Reset and Restore Profile
3-2
+FCLASS - Select Active Service Class
3-2
+VCID - Caller ID (CID)
3-3
+VRJD - Report Retrieved Caller ID (CID)
3-4
\N - Operating Mode
3-5
I - Identification
3-6
+GMI - Request Manufacturer ldentification
3-7
+GMI9 - Request Conexant ldentification
3-7
+GMM - Request Model ldentification
3-8
+GMR - Request Revision ldentification
3-8
+GCAP - Request Complete Capabilities List
3-8
+GCI - Country of Installation
3-9
&F - Restore Factory Configuration (Profile)
3-10
&T - Local Analog Loopback Test
3-10
&Y - Designate a Default Reset Profile
3-11
&W - Store Current Configuration
3-11
&Zn=x - Store Telephone Number
3-12
%7 - Plug and PIay Serial Number
3-12
%8 - PIug and PIay Vendor ID and Product Number
3-13
** - Load Flash Memory
3-14
3.2.2 DTE-Modem Interface commands
3-16
E - Command Echo
3-16
0 - Ouiet Results Codes Control
3-16
