Kontron coolMonster/PM, Руководство пользователя

Страница: 73 / 90

25 24BAppendix B: BIOS Operation
Kontron User's Guide
coolMonster/PM
73
600MHz settings.
Automatic Thermal Monitor Control
Circuit **
Disabled
TM1
TM2 ***
Enables the thermal control circuit (TCC) of the
thermal monitor feature of the Pentium-M CPU.
TM1 = 50% duty cycle
TM2 = Geyserville III
Automatic TTC must be enabled to ensure that
the processor operates within specification.
Hard Disk Timeout Disabled , 10 sec – 15 min
Inactivity period of hard disk required before
standby (motor off).
Video Timeout Disabled , 10 sec – 15 min
Inactivity period of user input device before the
screen is turned off.
Resume on Modem Ring
Off
On
Enabled wakes the system on incoming calls
detected by mode (RI).
Resume on Time
Off
On
Enabled wakes the system at a specific time.
Resume Time 00:00:00 Specifies the time when the system is to wake.
Power supply
ATX
AT
Specifies whether an ATX or an AT power supply is
used.
Power Button Function
Power Off
Sleep
Determines if the system enters suspend or soft
off when the power button is pressed.
Power Loss Control
Stay Off
Power On
Last State
Determines how the system behaves after a
power failure. This only works in conjunction with
a CMOS backup battery.
Notes : In the Option column, bold indicates default setting.
(*) Disable ACPI support whenever you are using an operating system without ACPI capability.
(**) See the chapter “Important Technology Information of this user’s guide for more details about these
features.
(***) coolMONSTER/PM with Celeron M processor does not support TM2.
25.6.2
168B
ACPI Control Submenu
Feature Option Description
APIC – IO APIC Mode *
Disabled
Enabled
This item is valid only for Windows XP. Also, a fresh install of
the OS must occur when APIC Mode is desired.
Test the IO APIC by setting an item to Enabled. The APIC Table
will then be pointed to by the RSDT, the Local APIC will be
initialized, and the proper enable bits will be set in IHC4M.
See section 14.1
Native IDE Support *
Disabled
Enabled
Enable Native IDE support for WINXP by setting this item.
The NATA Package will be created if this item is set to Enabled.
Changing this item will have no effect in WIN98, WINME, or
WIN2K. See section 13.2 for more details.
Deepest sleep state for standby:
None
S1
S3
This option chooses ACPI sleep states.
Using S3cold saves more power than
S3hot, which saves more than S1.
If choosing 'None' the OS will not
offer any standby. Please be sure your
board supports the appropriate S3