Kontron coolMonster/PM, Руководство пользователя

Страница: 22 / 90

9 8BKeyboard and Mouse Interface
Kontron User's Guide
coolMonster/PM
22
9
8B
Keyboard and Mouse Interface
The coolMONSTER/PM offers a PS/2-keyboard and PS/2-mouse interface on Connectors X15 and X16. The
lower interface is for the Mouse and the upper interface for the Keyboard connection. To find the
location of the keyboard and mouse connector, please see the Appendix E: Connector Layout chapter.
9.1
47B
PS/2-Keyboard Connector
The following table shows the pin-out of the PS/2-keyboard connector on the front.
Header Pi
n
Signal Name Function
1 KBDAT PS/2 Keyboard data (bi-directional I/O)
2 MSDAT PS/2 Mouse data (bi-directional I/O)
3 GND Ground
4 VCC * +5V
(max. current 500mA, shared with PS/2 Mouse Con)
5 KBCLK PS/2 Keyboard clock (bi-directional I/O)
6 NC PS/2 Mouse clock (bi-directional I/O)
Notes
: (*) To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.
9.2
48B
PS/2-Keyboard Configuration
Refer to the Keyboard Features submenu and the I/O Device Configuration submenu in the Appendix B:
BIOS chapter for information on configuration.
9.3
49B
PS/2-Mouse Connector
The following table shows the pin-out of the PS/2-Mouse connector on the front.
Header Pi
n
Signal Name Function
1 MSDAT PS/2 Mouse data (bi-directional I/O)
2 NC Not connected
3 GND Ground
4 VCC * +5V
(max. current 500mA, shared with PS/2 Keyboard Con)
5 MSCLK Mouse clock (bi-directional I/O)
6 NC Not connected
Notes
: (*) To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.