Kontron coolMonster/PM, Руководство пользователя

Страница: 38 / 90

15 14BEIDE Interfaces
Kontron User's Guide
coolMonster/PM
38
15.4.2
141B
Secondary EIDE Pin-out
Header Pin Signal Name Function
1 HDRSTJ Reset
2 GND Ground
3-18 SIDE_D1..D15 Secondary IDE ATA data bus
19 GND Ground
20 NC Not connected
21 SIDE_DRQ Secondary IDE DMA Request for IDE master
22 GND Ground
23 SIDE_IOWJ Secondary IDE IOWJ Command
24 GND Ground
25 SIDE_IORJ Secondary IDE IORJ Command
26 GND Ground
27 SIDE_RDY Secondary IDE ready
28 SEC_PD1
IDE2 Cable Select (470
Ω
to Ground)
29 SIDE_AKJ Secondary IDE DACKJ for IDE master
30 GND Ground
31 SIRQII IDE IRQ Secondary
32 NC Not connected
33 SIDE_A1 Secondary IDE ATA address bus
34 NC Not connected
35 SIDE_A0 Secondary IDE ATA address bus
36 SIDE_A2 Secondary IDE ATA address bus
37 SIDE_CS1J IDE chipselect 1 for secondary channel 0
38 SIDE_CS3J IDE chipselect 2 for secondary channel 1
39 DASP_S Secondary master/slave select
40 GND Ground
41 VCC * +5V
42 VCC * +5V
43 GND Ground
44 NC Not connected
Notes
: (*) To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.
To find the location of EIDE-controller interfaces 2, please see the Appendix E: Connector Layout
chapter.